Serving Staines-upon-Thames &amp; SurreyMon–Sun · 8am–6pm

info@dabplasteringbuilding.co.uk07834 974462Facebook

HomeAboutServicesPlasteringVenetian &amp; Polished PlasterCeilings &amp; Artex RemovalHouse RenovationsExtensionsLoft ConversionsGarage ConversionsMedia WallsGarden RoomsKitchensBathroomsExternal RenderingTilingFlooringCommercial Work

AreasStaines-upon-ThamesEghamAshford (Surrey)ChertseySunbury-on-ThamesWeybridgeWindsorFelthamKingston upon Thames

Our WorkReviewsContact07834 974462Get a Free Quote

HomeServicesTiling

 Staines-upon-Thames · Surrey
# Wall &amp; Floor Tilers in Staines-upon-ThamesLevel Floors, Straight Joints,Grout Lines That Stay Clean.
Tiling is where a bathroom or kitchen is won or lost. Our team preps the substrate properly, tanks every wet zone, sets out from the eye-line and lays porcelain, ceramic, natural stone and large-format tile to lines you'll still be happy with in ten years.

Get My Free Quote  Call 07834 974462

5.0 rated · 9 verified Yell reviews£10M public liabilityFixed quote in 2–3 days

15+

Years in the trade

5.0★

Rated on Yell

£10M

Public liability

2–3d

Quote turnaround

9

Surrey towns served

The service
## Tiling — The Short Version.
A plain-English overview of what the DAB team delivers, who it's for and when it matters. No marketing filler.

What it is

Tiling covers the setting out, cutting, fixing, grouting and sealing of wall and floor tiles — bathroom and wet-room walls and floors, kitchen splashbacks and floors, hallways and utility rooms, and full-height feature walls. It includes the unglamorous half that decides the result: substrate preparation, levelling, decoupling and tanking.

Who it's for

Homeowners refitting a bathroom or kitchen, clients who have already bought their tiles and need a tiler only, landlords turning around a rental, and our own renovation and bathroom clients where tiling forms part of a larger job we're already running.

When you need it

When tiles are cracked, drummy or lifting; when grout is permanently discoloured or crumbling; when a shower leaks into the room below; when a floor is being renewed; or when a new bathroom, kitchen or wet room is being built.

Why professional help matters

Almost every tiling failure is a preparation failure. A floor that flexes more than the tile can tolerate will crack the tile or the grout, however good the tile is. A shower fixed straight onto plasterboard with no tanking will leak — not maybe, eventually. And setting out from the wrong datum leaves slivers at the most visible edge of the room forever.

If it's left too long
## What Goes Wrong When Nobody Fixes It.
The specific ways this job goes bad when it's ignored, DIY'd, or handed to the cheapest quote in the WhatsApp group.

### Water getting behind the tiles
Tiles and grout are not waterproof — the tanking behind them is. A shower enclosure tiled onto untanked plasterboard soaks the board, rots the studs and eventually shows on the ceiling below.

### Cracked tiles and popped grout
Lay rigid tile on a flexing timber floor without an overboard or decoupling membrane and the movement goes straight into the tile. The crack usually runs in a line across several tiles, following the joist below.

### Hollow, drummy tiles that lift
Dot-and-dab fixing on floors leaves voids under the tile. Step on it, or drop something, and it cracks — and on a heated floor the voids cause hot and cold patches too.

### Bad set-out you can never unsee
Starting from the wrong corner leaves a 15mm sliver against the most visible wall, cuts running through the middle of a feature panel, and grout lines that don't line up between floor and wall. It costs nothing to set out properly and everything to redo.

Our process
## Five Steps. Zero Guesswork.
The exact system our team runs on every job — from your first message to the certificate in your handover pack.

- 1

### Survey and set-out plan
We measure the room, check floors for level and walls for plumb, count your tiles against the area plus wastage, and agree the set-out — where the full tiles land, where cuts fall, and how the wall and floor joints relate. Free on-site survey.

- 2

### Fixed written quote
Within 2–3 working days: an itemised quote for preparation, levelling or overboarding, tanking, adhesive and grout, fixing, trims, silicone and clean-down, with your tile supply either included through our trade accounts or clearly listed as client-supplied.

- 3

### Substrate preparation
Floors overboarded with tile backer board or levelled with a flexible self-levelling compound; a decoupling membrane added where movement is likely. Walls made good, plasterboard replaced with moisture-resistant or cement backer board in wet zones, and everything primed for the adhesive specified.

- 4

### Tanking and fixing
Wet zones fully tanked — liquid membrane plus reinforcing tape to every internal corner, pipe collar and floor junction, left to cure before a single tile is fixed. Tiles then solid-bed fixed with the correct trowel notch and back-buttering on large-format, spacers or levelling clips throughout, cuts made on a wet saw for clean edges.

- 5

### Grout, seal and hand back
Grouted in the agreed colour once the adhesive has cured, joints tooled and washed off cleanly, movement joints and all internal corners finished in mould-resistant sanitary silicone rather than grout. Natural stone sealed. Room swept, offcuts and packaging removed.

Why hire the DAB team
## Specific Wins. Not Vague Promises.
What you actually get when you hire us for this job — measurable, provable, and reflected in every one of our verified reviews.

- 
### Wet zones properly tanked
Every shower and wet-room floor is tanked as standard, not as an upgrade. It is the cheapest part of the job and the one that prevents the most expensive failure.

- 
### Solid-bed fixing
Full adhesive coverage under floor tiles and large-format wall tiles — no voids, no drumminess, no cracked corners in two years' time.

- 
### Set out around your eye-line
Full tiles where you look first, cuts driven into corners and behind the door, and floor and wall joints aligned where the tile sizes allow.

- 
### Any format handled
From 20mm mosaic to 1200x600 large-format porcelain, herringbone, brick bond, metro, patterned encaustic and natural stone — each with the right adhesive, trowel and levelling system.

- 
### Coordinated with the rest of the job
Because we also plaster, plumb and wire through our trusted network, the tiling slots into a single programme rather than waiting on someone else's diary.

- 
### Fixed price, insured, tidy
£10M public liability, dust-sheeted rooms, daily clean-down and a written price agreed before the first tile is cut.

Deep detail
## Materials, Methods &amp; Where It Applies.
The specification-level answers the internet usually skips.

### Substrates and how we treat them
Timber floors: overboarded with 6mm or 10mm tile backer board screwed at close centres, or a ply overlay plus flexible adhesive, with a decoupling membrane on longer spans. Concrete and screed: primed and levelled, with any live cracks isolated. Plasterboard walls: fine for dry areas, replaced with moisture-resistant board or cement board in showers. Existing tile: can be tiled over if it is completely sound and well keyed and the resulting height is acceptable, but our default recommendation is to strip back.

### Tanking a wet area properly
A proper tank is a continuous, unbroken barrier. Liquid membrane brushed or rolled in two coats, reinforcing tape bedded into every internal corner and wall-to-floor junction, dedicated collars around pipe penetrations and the shower valve, taken 100mm beyond the wet zone in every direction, and fully cured before tiling. In a full wet room the floor former or the falls-built screed is tanked into the same continuous system so there is no joint for water to find.

### Large-format and natural stone
Tiles over 600mm long need a level substrate, back-buttering, a levelling clip system and often two people to place. Natural stone — marble, travertine, limestone, slate — needs white adhesive to avoid shadowing through the tile, sealing before grouting on porous stone, and a second seal after. Polished porcelain gets a pre-grout seal so pigment doesn't stain the micro-pores.

### Underfloor heating
Electric mat and wet UFH systems both get tiled with a flexible S1 or S2 adhesive and a flexible grout, with the heating left off through fixing and then brought up slowly over several days rather than switched straight to full temperature. Rushing the first heat cycle is a common cause of cracked grout on an otherwise perfect floor.

### Grout, silicone and long-term maintenance
Cement-based flexible grout for most domestic work, with epoxy grout available where staining resistance really matters — behind a hob, in a commercial washroom or on a heavily used shower floor. Every change of plane — internal corners, wall-to-floor, around a bath — is silicone, not grout, because those junctions move. Re-siliconing every few years and avoiding acidic cleaners on stone keeps a tiled room looking new for a decade.

Recent work
## Tiling — On the tools.

Where we work
## Serving Staines-upon-Thames &amp; Surrey

- Staines-upon-Thames
- Egham
- Ashford (Surrey)
- Chertsey
- Sunbury-on-Thames
- Weybridge
- Windsor
- Feltham
- Kingston upon Thames

FAQ
## Tiling — Straight Answers.
The questions we're asked at almost every survey. Not on the list? Call 07834 974462 — the DAB team is happy to talk it through.

How much does tiling cost in Staines-upon-Thames?+Guide labour rates across Surrey run roughly £40–£60 per m² for standard ceramic or porcelain wall and floor tiling, rising to £70–£110 per m² for large-format, natural stone, mosaic or intricate patterns. Preparation, tanking and levelling are quoted separately and itemised, so you can see exactly what you're paying for.

How long does tiling a bathroom take?+A typical family bathroom — floor plus full-height shower walls and half-height elsewhere — takes 3–5 working days including preparation and tanking, with grouting on the final day. Large-format or patterned work adds a day or two for cutting and setting out.

Can I supply my own tiles?+Yes, and plenty of clients do. Order about 10% extra for cuts and breakages, 15% for herringbone or diagonal layouts, and try to keep it to one batch so shading is consistent. We'll confirm quantities at the survey before you order.

Do you tile over existing tiles?+Only where the existing tiles are completely sound, well bonded, and the extra thickness doesn't foul doors, thresholds or sanitaryware. It saves mess but hides whatever is behind, so we'll usually recommend stripping back, especially in a shower.

Is tanking really necessary?+In any shower or wet room, yes. Grout is porous and silicone is a seal, not a membrane — water will get through eventually. Tanking is a small proportion of the job cost and prevents a rebuild later.

Can you tile onto underfloor heating?+Yes — both electric mats and wet systems, using flexible adhesive and grout, with a controlled first heat-up cycle after the floor has fully cured.

What about natural stone — will it stain?+Untreated marble, limestone and travertine are porous and will mark. We seal before grouting and again after, and give you the maintenance routine: pH-neutral cleaners only, no vinegar or bleach-based products.

Do you cover other Surrey towns?+Yes — tiling across Staines-upon-Thames, Egham, Ashford, Chertsey, Sunbury-on-Thames, Weybridge, Windsor, Feltham and Kingston upon Thames.

Related work
## You might also need

See all services →

### Bathrooms
Full-tank tanking, level-line tiling, silent plumbing, correct electrics. Our team refurbishes bathrooms, en-suites and wet rooms as a single coordinated fit — one price, one programme, one warranty.

Read more 
### Kitchens
Design-led kitchens fitted level, sealed watertight, and finished to the standard the rest of the house deserves. One team handling plaster, tiling, plumbing, electrics and worktops — no chasing anyone.

Read more 
### Flooring
A floor is only ever as good as what's under it. We level, prime and prepare the subfloor first, then fit engineered wood, LVT, laminate or tile with proper expansion, clean thresholds and skirting or beading that finishes the room off.

Read more 

Free quote
## Ready For A Fixed Price On Your Tiling?
Free on-site survey. Fixed written quote in 2–3 working days. No pressure, no hidden costs, no unknown extras. The DAB team replies personally.

07834 974462
-  Free on-site survey
-  Fixed written quote in 2–3 days
-  £10M public liability, owner-led team
-  One point of contact from quote to snag list

"Honestly the tidiest tradesperson I've ever met. Professional, diligent, great attention to detail." — Helen A., verified Yell review.

Owner-led plastering and building specialists in Staines-upon-Thames. 15 years, £10M public liability, word-of-mouth reputation.

### Services

- Plastering
- Venetian &amp; Polished Plaster
- Ceilings &amp; Artex Removal
- House Renovations
- Extensions
- Loft Conversions
- Garage Conversions
- Media Walls

### Areas Covered

- Staines-upon-Thames
- Egham
- Ashford (Surrey)
- Chertsey
- Sunbury-on-Thames
- Weybridge
- Windsor
- Feltham
- Kingston upon Thames

### Contact

- 07834 974462
- info@dabplasteringbuilding.co.uk
- TW18 2TB, Staines-upon-Thames, Surrey
- Leave a Google review
- Follow us on Facebook

© 2026 DAB Plastering and Building Services. All rights reserved.

AboutOur WorkReviewsContactPrivacyCookiesTerms

Call NowFree Quote

We use essential cookies to run this site, and optional cookies only if you accept. Cookie Policy

AcceptReject